OTHER CONSTRUCTION SERVICES
1.2 SCOPE OF WORK
.1 Provide material, tools, labour and supervision necessary to assist the commissioning agent in the verification of commissioning of the equipment and systems as outlined in the drawings, specifications and functional performance test forms.
.2 Contractors and Manufacturer Representative are to participate in the commissioning process and cooperate fully with the Third-Party Commissioning Agent (CxA).
.3 Once the Contractor and Manufacturer Representative have completed their start-up, testing, commissioning and troubleshooting, provide material, tools, labour and supervision to verify in detail with the CxA that the equipment and systems have been commissioned in accordance with this and related Sections. This includes verification of system performance as outlined in the individual equipment Specification Sections.
.4 Commissioning to be a line item in Manufacturers cost breakdown.
1.3 GENERAL
.1 Commissioning is a planned program of tests, procedures and checks systematically carried out on equipment, systems and integrated systems of the finished project to verify that they meet the owner`s project requirements. Commissioning is performed after systems and integrated systems are completely installed, functional and the Contractor`s and Manufacturer Representative's responsibilities have been completed and approved.
.2 Objectives:
.1 Verify installed equipment, systems and integrated systems operate in accordance with the
owner`s project requirements, the contract documents and design criteria and intent.
.2 Verify equipment performance as outlined in the individual equipment Specification Sections.
.3 Verify that O&M personnel have been fully trained in all aspects of the installed equipment and systems.
.4 Verify that proper documentation relating to the commissioned equipment and systems are
compiled and provided to the Owner.
.3 A third-party commissioning agent will perform commissioning verification of the new equipment and control sequences. This will include start-up verification activities and functional performance testing activities, including testing of system performance.
.4 Manufacturer Representative participates in the commissioning process, assisting with operation of equipment and systems, troubleshooting and making adjustments as required.
.1 Systems to be operated at full capacity under various modes to determine if they function
correctly and consistently at peak efficiency. Systems to be operated interactively with each other as intended in accordance with contract documents and design criteria.
.2 During these checks, adjustments to be made to enhance performance to meet
environmental or user requirements.
.3 Commissioning process includes the testing and verification on the equipment performance,
as outlined in the individual equipment Specification Sections.
.5 Static Verification forms, Start-up Verification forms and Functional Performance Test forms will be provided by the Commissioning Agent for completion by the Contractor and Manufacturer.
.6 Manufacturer factory test reports, start-up reports, installation checklists, performance measurement forms to be provided as part of the required submittals.
This is a tender notice only. In order to submit a bid, you must obtain official tender documents from the New Brunswick Opportunities Network, another authorized tendering service or as indicated in the tender notice.
