25-187 Delta - Supply and delivery of PVC water and sewer pipe

Supply and delivery of PVC water and sewer pipe as specified below

1) Pipe, PVC Sanitary SDR28 4in (100mm), 4.27m length  2561 M
2) Pipe, perforated PVC sanitary SDR28 4in (100mm), 4.27m length  65 M
3) Pipe, PVC Sanitary SDR28 6in (150mm), 4.27m length  169 M
4) Pipe, PVC Sanitary SDR35 8in (200mm), 4.27m length  843 M
5) Pipe, PVC Sanitary SDR35 10in (250mm), 4.27m length  7 M
6) Pipe, PVC Sanitary SDR35 12in (300mm), 4.27m length  150 M
7) Pipe, PVC Sanitary SDR3515in (375mm), 4.27m length  5 M
8) Pipe, PVC Water C900 4in (100mm), 6.1m length
     Note: Use C900 until C909 is available  139 M
9) Pipe PVC Water C909 4in (100mm), 6.1m length
     Note: Once available, this will be used instead of C900 139 M
10) Pipe, PVC Water 150MM C909 6.1m length  923 M
11) Pipe, PVC Water 200MM C909 6.1m length 3400 M
12) Pipe, PVC Water 250MM C909 6.1m length  35 M
13) Pipe, PVC Water 300MM C909 6.1m length  1600 M
14) Pipe, PVC Water 350MM C909 6.1m length  20 M

Supplemental Specifications:

• All PVC pipe must be CSA and AWWA certified, stamped, and date stamped.
• All PVC pipe push-on joints must have double integrally thickened bell and spigot ends.  Samples of pipe may be required for Delta’s inspection prior to contract award.
• Bevels must be uniform and clean.
• Push-on double integrally thickened bell and spigot type must conform to ASTM D3139 clause 6.2 with elastomeric gaskets to ASTM F477.
• C909 pipe shall be capped and taped.
• All pipe must be thoroughly inspected, not out of round and certified fit for its intended use.